Pull the 4 fasteners in the direction of the arrow to remove the fasteners from the cover. Hold the photosensitive drum grasp the exit and pull up to force the lid to separate from the photosensitive drum. If you don't need biochemical cotton you can add other methods as needed. After placing the medium the medium should be opposite to the bottom filter plate. Then, close the cover flatten it cover the barrel and cover the regulator and tighten the four buckles. Place an entrance and exit for the lower body and another entrance and exit for the lid.
Tighten these two inlets and outlets. When using for the first time please connect the inlet and outlet pipes and forcefully suck in the mouth pipe. Fill the water inlet and drain pipes with water by siphoning and install other parts. Note that while absorbing water the outlet pipe must be immersed in the water and the pressure drop pipe must be lower than the water level of the water tank.
- Voltage: 220-240V
- Type: fish
- Power: 6W
- 1x Aquarium Filter Barrel Tank
We are experiencing a high volume of orders, shipments may be delayed by a few days. Our processing time is 1-3 days and may extend to 6 days during peak times.
Our shipping time is between 7-20 business days. Orders are not shipped or delivered on weekends or holidays. Please allow additional days in transit for delivery. If there will be a significant delay in the shipment of your order, we will contact you via email.
Your patience and understanding are very much appreciated. Thank you!