Nano Acrylic Co2 Diffuser
Guarantee Safe Checkout
Nano Acrylic Co2 Diffuser
Excellent CO2 dissolution rates, easy maintenance and durable materials make this CO2 atomizer diffuser a perfect choice for novice and expert aquascapers alike. Designed to be used like a regular glass CO2 atomizer diffuser, but offering higher CO2 dissolution rates, this diffuser is perfect for high-tech planted tanks.
Small, easy to clean and hard wearing - this is the perfect diffuser for pressurised CO2 injection.
A CO2 Diffuser optimizes the CO2 entering the aquarium for efficient plant absorption and less waste. As CO2 bubbles pass through the porous diffuser, they are diffused into streams of tiny bubbles. With increased surface area, the tiny CO2 bubbles are readily dissolved into the water, increasing the saturation of CO2 in the aquarium ecosystem.
To use this CO2 atomizer diffuser, simply connect your CO2 bottle regulator to the atomizer with our CO2 Tubing, and tighten the safety nut.
It is recommended that you set the pressure on your regulator to around 1.5 bar as a starting point.
You should then lower the pressure of the regulator until the pressure is insufficient to force the CO2 through the atomizer, then increase slightly from this level.
The working pressure needed to use with atomizer will vary with regulators.
Please allow a few minutes for sufficient pressure to build up to allow the CO2 to begin passing through; it may not begin instantly.
Small, easy to clean and hard wearing - this is the perfect diffuser for pressurised CO2 injection.
A CO2 Diffuser optimizes the CO2 entering the aquarium for efficient plant absorption and less waste. As CO2 bubbles pass through the porous diffuser, they are diffused into streams of tiny bubbles. With increased surface area, the tiny CO2 bubbles are readily dissolved into the water, increasing the saturation of CO2 in the aquarium ecosystem.
To use this CO2 atomizer diffuser, simply connect your CO2 bottle regulator to the atomizer with our CO2 Tubing, and tighten the safety nut.
It is recommended that you set the pressure on your regulator to around 1.5 bar as a starting point.
You should then lower the pressure of the regulator until the pressure is insufficient to force the CO2 through the atomizer, then increase slightly from this level.
The working pressure needed to use with atomizer will vary with regulators.
Please allow a few minutes for sufficient pressure to build up to allow the CO2 to begin passing through; it may not begin instantly.
